p-ns vishay thin film document number: 60023 for technical questions, contact: thin-film@vishay.com www.vishay.com revision: 22-feb-08 53 commercial thin film chip resistors surface mount chips for applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all vishay?s proven precision thin film wraparound resistors will meet your exact requirements. manufactured with the same material and processes as qpl and manufactured in a qpl facility. construction features ? lead (pb)-free or sn/pb terminations available ? moisture resistant (spm) special passivation method ? non-standard values available ? pre-tinned terminations over nickel barrier (gold available) ? very low noise and voltage coefficient (< - 30 db, 0.1 ppm/v) ? non-inductive ? laser-trimmed tolerances to 0.02 % ? in-lot tracking less than 5 ppm/c typical performance * pb containing terminations are not rohs compliant, exemptions may apply a ctual size 0505 adhesion layer high p u rity al u mina s ub strate n ickel b arrier solder coating passi v ated n ichrome resisti v e film spm passivation enhancement abs tcr 25 tol 0.1 standard electrical specifications test specifications conditions material passivated nichrome absolute tcr 25 ppm/c (available to 10 ppm/c) - 55 c to + 125 c absolute tolerance 0.1 % (available to 0.02 %) + 25 c power rating see table voltage coefficient 0.1 ppm/v typical working voltage see table operating temperature range - 55 c to + 125 c storage temperature range - 55 c to + 150 c noise < - 35 db typical case size power rating - (mw) max working voltage resistance range - ( ) 0.1 % < 0.1 % 0.1 % < 0.1 % 0.1 % < 0.1 % 0402 50 50 75 75 25 - 75k 250 - 70k 0502 100 100 75 75 20 - 130k 250 - 130k 0505 150 150 75 75 20 - 301k 250 - 301k 0603 150 150 75 75 10 - 175k 250 - 175k 0805, 0705 250 200 100 100 10 - 475k 250 - 475k 1005 250 250 100 100 10 - 649k 250 - 649k 1010 500 500 150 100 50 - 1m 250 - 1m 1206 400 400 200 200 10 - 1m 250 - 1m 1505 400 400 150 150 10 - 1m 250 - 1m 2208 800 750 150 150 10 - 1.75m 250 - 1m 2010 800 750 200 150 10 - 2m 250 - 1m 2512 1000 750 200 200 10 - 3m 250 - 1m a v aila b le p b -free rohs* compliant
p-ns vishay thin film commercial thin film chip resistors www.vishay.com for technical questi ons, contact: thin-film@vishay.com document number: 60023 54 revision: 22-feb-08 surface mount chips dimensions in inches derating curve case size term l w t d e 0402 b 0.042 0.008 0.022 0.005 0.012 to 0.033 0.010 0.005 0.010 0.005 0502 b 0.055 0.006 0.025 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0505 b 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 b 0.064 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005 0805, 0705 b 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1005 b 0.105 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1010 b 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 b 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005, - 0.010 0.020 + 0.005, 0.010 1505 b 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2010 b 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2208 b 0.230 0.007 0.075 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 b 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 d w l t e environmental tests environmental test 10 k r (%) 100 k r (%) thermal shock 0.02 0.02 short time overload 0.01 0.01 low temperature operation 0.01 0.01 resistance to solder heat 0.04 0.03 moisture resistance 0.02 0.01 high temperature exposure 0.03 0.06 load life (10 000 h, + 70 c) 0.05 0.05 tcr 25 ppm/c 25 ppm/c am b ient temperat u re c 0 70 125 150 0 20 40 60 8 0 100 percent of rated po w er global part number information new global part numbering: p-1206e1002bbts (preferred part number format) global model case size tcr characteristic resistance tolerance termination packaging p- 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 y = 10 ppm/c* d = 15 ppm/c e = 25 ppm/c** h = 50 ppm/c k = 100 ppm/c * > 250 ** > 25 the first 3 digits are significant figures and the last digit specifies the number of zeros to follow. ?r? designates the decimal point. example: 10r0 = 10 1001 = 1 k 1002 = 10 k q = 0.02 %* a = 0.05 %* b = 0.1 % d = 0.5 % f = 1 % g = 2 % j = 5 % * for values 1 k b = wraparound sn/pb solder 63 % sn/37 % pb w/ nickel barrier g = wraparound au over ni (gold) termination epoxy solderable rohs compliant - e4 s = wraparound lead (pb)-free solder 96.5 % sn/3.0 % ag/ 0.5 % cu rohs compliant - e1 bs =bulk 100 min 1 mult ws =waffle 100 min 1 mult tape and reel t0 = 100 min 100 mult t1 = 1000 min 1000 mult t3 = 300 min 300 mult t5 = 500 min 500 mult tf = full reel ts = 100 min 1 mult historical part number example: p0805h6801bbt p 0805 h 6801 b b t style case size tcr characteristic ohmic value tolerance termination packaging 06e1 02b 0 2 1 bt s p-
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
